Add a cute and crafty denim door hanger to your home for tons of flair and personality. Raw fringe on the edges of this door hanger give it a homey look, while denim adds a rustic look
Supplies
Project Needs & Notes
- Denim (size varies depending on the design used)
- Medium-weight (2.5 ounce) cutaway stabilizer
- Seam ripper for fringing
- Interfacing
- Ribbon for hanging
For this project, I used the Birds on a Wire Clothesline design. Find more clothesline designs in the Clothesline category here.
This project was featured in the following:
All About Denim Lookbook
Designs Used
Cut a piece of denim a little larger than the hoop that you'll use to stitch the design.
Hoop the denim with one piece of cutaway stabilizer.
Embroider the design.
After embroidering, trim the stabilizer away from the back. Leave about 1/2" around the design.
Draw a rectangle around the design, leaving 2" around all sides.
Cut out the rectangle.
Cut a piece of denim the same size for the back.
Use interfacing to keep the door hanger from sagging when it's done. Cut a piece of interfacing 2" smaller than the rectangle.
Place the back piece of denim right side down, then add the interfacing.
Add the embroidered piece, right side up.
Stitch together, 1" from the edge.
Fringe the edges to add texture.
Attach a ribbon for hanging.
Use this denim door hanger to add a bit of fun and flair to your office or home decor. Use our alphabet designs to add messages like "Keep Out", "Sleeping", and more!
