💫Get 10 Designs for $20!

Wear It. Stitch It. Love It. 🌟 Apparel & Accessory designs are 60% off!

Embroidered Ottoman Slipcover

Completed Embroidered Ottoman Slipcover project, featuring Tuscan Urn with Flowers design

Bring the warm, tranquil glow of Tuscany into your home with an embellished ottoman slipcover. Turn a simple piece of furniture into an eye-catching conversation piece.

Supplies & Materials:

Supplies needed:


  • Cube ottoman
  • 1 yard home decor fabric (drapery prints). The amount of fabric required will vary according to the size of the ottoman.
  • 2 yards decorative trim

The designs used in this tutorial include:


Tuscan Urn I (Large or Small)

Tuscan Urn II (Large or Small)

Gather Materials:

First, cut the fabric to the size that you need. Measure the sides and the top of your ottoman, and add 1/2" to each measurement for seam allowances.


The ottoman that we have is a 16" cube. We cut five 16 1/2" x 16 1/2" squares.


Four squares are for the sides, and one square (shown in coordinating decorator fabric) is for the top.

Two fabric pieces lie on a wood-grain table: a larger beige piece and an overlapping blue piece with cream-colored floral embroidery.

Start Embroidering:

Embroider as many pieces as you'd like. We want the Tuscan urn embroidery to be on two sides of the slipcover, so we embroidered two pieces of fabric.


Drapery fabrics tend to be quite heavy, so we backed the fabric with a medium weight-tear-away stabilizer.

Two beige slipcovers with floral embroidery depicting vases with flowers and leaves in blue, green, brown, white, and pink, laid on a wooden surface.

Hem the bottom of the side pieces. Press a 1/4" hem on the bottom edge of each side piece.

Hand with silver rings holding edge of beige fabric embroidered with white and blue flower, resting on dark wood surface.

Using a hem stitch, finish the hem all along the bottom of each side piece.

Close-up of a sewing machine stitching a beige fabric with a small textured pattern, guiding fabric under the presser foot on a white sewing platform.

Next, attach the side pieces to the top piece, along with a fringe trim. Lay the top piece right side up. Lay the first side piece right side down and line it up with the top piece.


Tuck the trim, starting 1/4" from the edge, between the top and side pieces with the fringe facing to the inside. Pin into place.

Folded fabric with a yellow textured layer featuring floral embroidery, layered over a blue fabric with a white floral pattern and fringed edge on a wood surface.

Sew the first side piece, the top piece, and the trim together with a 1/4" seam starting 1/4" in from one end. Sew along that side and end 1/4" from the other end.


Starting and stopping 1/4" from each end will allow room for the sides to be sewn later.


Repeat these steps for each side, adding each side to the top piece.

Close-up of a sewing machine stitching mustard yellow fabric with a blue pin holding it in place. A hand is guiding the fabric under the needle.

Next, sew the sides together, finishing the cover. Align the edges of the sides, right sides together, paying close attention to line up the bottom edge perfectly. Pin into place.

Piece of beige fabric with a subtle textured pattern, pinned and partially folded on a dark brown wooden table, with faint embroidery stitches.

Sew a 1/4" seam, starting at the bottom edge (hems) all along the side. Repeat this for each side.


Turn the cover inside out and slip it over the ottoman.


Ottomans can be found at many home goods and furnishing stores, discount stores, and online. In any Internet search engine, search for "cube ottoman."

Close-up of a white sewing machine stitching yellow textured fabric with red and black pins holding it in place under the needle.