Candlewicking began as a hand embroidery style that used thick cotton thread and elaborate knots. By using 30 weight cotton thread and smooth, satin stitch dots, the style can be beautifully echoed in contemporary machine embroidery.
Supplies & Materials:
Project Materials or Supplies
- Candlewicking design
- Fabric / garment
- Medium-weight (2.5 ounce) cutaway stabilizer
- 30 weight cotton thread
The design used in this tutorial include:
- M4568, Flutterby Flourish (Candlewicking)
- G2410, Rose Blossom (Candlewicking)
Gather Materials:
Traditional candlewicking was done centuries ago with thick, cotton thread on white muslin.
The same cotton thread was used to make hand-dipped candles, which is how the needle art got its name.
Today's embroidery machines can't accommodate that type of thread, and the knot types used can't be done by machine either.
However, there are beautiful machine embroidery designs that are inspired by, and echo, the traditional candlewicking style.
This is a machine embroidery design of a candlewicking butterfly. The elaborate knots that you see in handwork are instead represented by satin stitch dots.
When using your embroidery machine to stitch candlewicking designs, the primary difference is the thread choice.
You can see the technique in this example, where the butterfly is embroidered onto a towel.
A template is a printout of a design, and it's an excellent tool to plan where to stitch.
Print a template of the design from your embroidery software. If you do not have an embroidery software, take a look at our helpful video on using dielines.
We also recommend Wilcom's Hatch software which comes in different levels depending on what you'd like to use the software for. Hatch Organizer works well to view your designs, print dielines and templates, change design colors, and create basic design layouts. (This is an affiliate link. We may earn commission on purchases made with this link.)
Arrange the template on the item, then mark the center points, as well as the vertical and horizontal axis lines.
Start Embroidering:
Hoop the fabric with one piece of cutaway stabilizer, lining up the marks on the fabric with the marks on the hoop.
The color change sheet for the design shows that 30 weight cotton thread should be used.
Thread your machine with the appropriate thread.
No special thread in the bobbin is necessary -- just 30 weight cotton thread in the top.
Embroider the design.
After embroidering, trim the excess stabilizer away from the back.
It's as easy as that!
You can use 40 weight rayon or polyester thread also, but 30 weight cotton thread will give the most texture in the areas with the dots.
Some designs, like this one of a rose, use a mixture of 30 weight cotton thread, and 40 weight.
The color change sheet for each design shows the type of thread used.
Use this embroidery technique as a way to add the beauty of hand embroidery to your machine embroidery projects.
